如果在双输出转换器上使用不平衡负载会发生什么?一些不受调节的转换器具有功率共享功能,其中所有或部分负载可以从一个输出引脚获取。
您当前的位置:首页 -> 幸康技术资料 -> 如果在双输出转换器上使用不平衡负载会发生什么?

如果在双输出转换器上使用不平衡负载会发生什么?

http://www.twcincon.com/ 网 2021年4月27日 14:36
【核心提示】 如果在双输出转换器上使用不平衡负载会发生什么? 一些不受调节的转换器具有功率共享功能,其中所有或部分负载可以从一个输出引脚获取。

如果在双输出转换器上使用不平衡负载会发生什么?

一些不受调节的转换器具有功率共享功能,其中所有或部分负载可以从一个输出引脚获取。

调节双输出转换器调节+Vout和-Vout之间的电压,并允许公共引脚浮动(因此,如果+/-15V不对称加载,比如说+80%,-20%,那么输出电压差将保持在30V,但公共引脚将漂移,因此输出电压将测量为+13,-17V,例如)。如果负载不平衡时需要平衡输出,则使用后调节来稳定输出。

详见数据表交叉规范。

What happens if I use an unbalanced load on a dual output converter?

Some unregulated converters feature power sharing, where all or some of the load can be taken from just one output pin.

Regulated dual output converters regulate the voltage between +Vout and -Vout and allow the common pin to float. (So if a +/-15V is asymmetrically loaded with, say +80%, -20%, then the output voltage difference will stay 30V, but the common pin will drift so that the output voltage will measure +13, -17V, for example). If a balanced output is required with unbalanced load, then use post-regulation to stabilize the outputs.

Please see cross regulation specification in datasheet for detail.