当输出电压调整时，额定功率会改变吗？

当输出电压调整时，额定功率会改变吗？

如果调整输出电压，必须考虑输出功率和输出电流。始终确保模块的输出功率保持在或低于最大额定功率。还要注意，如果Vo.set低于标称值，Pout.max也会相应减小，因为Io.max是一个绝对极限。因此，Pout.max=Vo.set x Io.max也是一个绝对极限。

1微调，输出电压超过额定电压请注意最大输出功率=额定输出电压x额定输出电流。电源不允许在超过最大输出功率的输出功率下工作，因为加热内部元件可能会导致电源中断。

例如）CHB100W-24S05的输出电压更改为5.2V的情况电源允许工作的最大输出电流；
=最大输出功率/输出电压设置
=100W/5.2V
=19.23安培

2微调下来，输出电压低于额定电压输出电流必须小于额定电流，因为加热内部元件可能会导致电源中断。

例如）CHB100W-24S05的输出电压更改为4.8V的情况
最大输出电流=20A

Does rated power change when output voltage adjusted?

If the output voltage is adjusted, the output power and output current must be considered. Always ensure that the output power of the module remains at or below the maximum rated power. Also be aware that if Vo.set is below nominal value, Pout.max will also decrease accordingly because Io.max is an absolute limit. Thus, Pout.max = Vo.set x Io.max is also an absolute limit.

1. TRIM UP, the output voltage exceeds the nominal voltage

Please be aware Maximum output power = Rated output voltage x Rated output current. The power supply is not allowed to be operated in the output power that exceeds the maximum output power because the power supply may get broken by heating the internal components.

ex.)The case that the output voltage of the CHB100W-24S05 is changed to 5.2V
The maximum output current that the power supply is allowed to be operated;
= Maximum output power / Output voltage setting
=100W / 5.2V
=19.23A

2. TRIM DOWN, the output voltage is less than the nominal voltage
The output current must be less than the rated current because the power supply might get broken by heating the internal components.
ex.)The case that the output voltage of the CHB100W-24S05 is changed to 4.8V
Maximum output current = 20A